1. Defined area: Min effective range;
2. Blind spot detection function;
3. Motion Object distance Judgment function; 3.Relative speed judgment function;
4. Lane change warning function.
BSD(Blind Spot Detection) System: BSD warn the driver against collisions that may occur due to a lane change manoeuvre. BSD are intended to supplement the vehicle’s interior and exterior rear-view mirrors. BSD are intended to detect vehicles to the rear and sides of the subject vehicle (see Figure). When the subject vehicle driver indicates the desire to make a lane change, the system evaluates the situation and warns the driver if a lane change is not recommended. The system will not take any automatic action to prevent possible collisions. Responsibility for the safe operation of the vehicle remains with the driver.
| name | param |
|---|---|
| Item | parameter |
| System configuration | 1pcs ECU + 2pcs Radar Sensor |
| compliance | ISO17387:2008 |
| Active speed | ≥ 10Km/h |
| Relative Detection speed | ±250Km/h |
| Relative Detection speed | Accuracy ±0.25Km/h(Typical) |
| Detection Rang Accuracy | ±0.25m(Typical) |
| Max. Detection Range Trunks | 100~150m; Passengers Car:50~100m; Motorcycles:20m |
| Alert Range | 3m~15m |
| Warning Accuracy | Passengers Car: ≥98% Motorcycle:≥95% |
| HMI(Human Machine Interface) | Two Level |
| warning | Level 1: LED; Level 2: LED blanking + Buzzer |
| Water proofing | IP6K7K |
| Power consumption | ≤ 650mA @12VDC |
| Operation Voltage Range | 9.0 ~ 16VDC |
| Operation temperature | -40°C ~ +85°C |
| Storage Temperature | -40°C ~ +95°C |